Questions?
Call 603 659 5335 or email me

HUMAN Speakers is still building and shipping speakers
during this public health crisis More information.
Best viewed in "landscape" mode.

Replacement part number ACC 004 N
$32.00 each

Most older speakers have a weak link in their implementation.

The input terminals are often awkward to use, and only accept smaller gauge stripped wire.

Also, the internal wiring is fairly skimpy (20 or 22 AWG), and the crossover capacitors were the cheapest available at the time.

The ACC 004 N is a complete assembly I designed and developed to remedy all these issues and upgrade the following models:

EPI Time/Energy 70 and T/E 70/2

EPI Time/Energy 100, T/E 100+, and T/E 100/2

The angle-sided Epicure 4 and Epicure 5

It features a high quality round backplate, with a pair of gold-plated, color-coded five-way binding posts securely attached on standard 3/4" centers. These will easily accommodate up to 10 AWG wire in the hole through the posts, along with several other connection methods.

The crossover capacitor is a high-quality film type with vanishingly low deviation from the ideal impedance curve, and the internal wires are color-coded 16 AWG oxygen-free copper with connectors that match the terminals on the drivers.

Note, Epicure 4 and 5: if you are buying new tweeters at the same time, the new wires and new tweeter will match each other, but not the old parts, unless you specifically ask for that.

Here is where a photo of a pair I just made will go soon!

* * *
Top - Contact -
General Topics (Home)
New Speakers - Owner Support - DIY Projects
EPI and Epicure - Genesis Physics -
All Other Speaker Repairs

© Copyright - All Rights Reserved

Al Major Credit and Debit Cards Accepted

7 Kelsey Road, Lee, New Hampshire 03861

Prices can change and specifications will improve without notice

Load a printer-friendly version of this page